MIG-ESP® Rooflect

MIG DHMb® Lining System for Rooflect Application

Place of Origin: Germany

MIG-ESP® Rooflect roof insulation heat reflective coating, applied to facades and roofs. Its heat and cold regulating properties help to reduce energy costs and CO2 emissions. Water-resistant technology prevents mold and algae from forming.

• brilliant roof surfaces through light reflection (UV – IR)
• increases roof lifespan
• heating and cooling regulation (infrared reflection)
• natural prevention against algae and moulds   
• Prevents algae and fungi in a natural way
• Recommended for ecologically energetic renovation
• CO² savings

• Depending on the type and porosity of the substrate, approx. 0.50 L/m² with two coats on smooth surfaces. 
• Note: Rough or highly absorbent surfaces can increase consumption.  Exact consumption quantities are to be determined by creating test areas.  

Packaging: 5/15 Liter Plastic Bucket

MIG DHMb® Lining System MED for Interior Application (Anti-Microbial)

Place of Origin: Germany

The heat-reflecting interior coating for walls and ceilings enables a healthy and comfortable room climate. Lower heating and cooling demands reduce both costs and CO2 emissions. The formation of mold is prevented in a natural way. In inpatient areas, MIG-ESP® Interior Anti-Microbial can help prevent and/or reduce hypothermia and hyperthermia.  

• > 99.99% bacterial reduction 
• No additional biocides
• Heating and cooling regulation (Infrared reflection)
• Better indoor climate due to lower heating demand
• Reducing condensation
• Stable and comfortable room climate
• Awarded the certificate “Recommended for healthy housing” by the society for Medically Sound Lodgings, Building Hygiene and Indoor Toxicology.
• Antibacterial effect
• Recommended for ecological, energy-efficient renovation
• Prevents mold and fungi in a natural way
• CO² emission reduction

• Interior Anti-Microbial can be applied with paint rollers, brushes, or spraying units.
• Interior Anti-Microbial can be used with an appropriate primer on a variety of substrates in the entire indoor area.  
• MIG-ESP® Interior Anti-Microbial is the finish coat for MIG Therm M 65 and MIG 262.  Further areas of application include renovations on all paint-bearing substrates. 
• The MIG-ESP® - color chart offers a wide range of color choices.

• Depending on the type and porosity of the substrate, approx. 0.4 liter/M2 with two coats on smooth surfaces.
• Rough, structured, or highly absorbent surfaces can significantly increase consumption.  Exact consumption quantities are to be determined by creating test areas.

Packaging: 5/15 Liter Plastic Bucket

MIG DHMb® Lining System for Interior Application

Heat-Reflecting Coating 

Place of Origin: Germany

MIG-ESP® Interior is based on the MIG DHMb® Lining Technologie (DHMb® – double hybrid membrane) and is a highly breathable interior coating. It works like a membrane that optimally regulates humidity and reflects heat. Heating costs can thus be saved. Certified by Dr. Blei (Society for Residential Medicine, Building Hygiene and Indoor Toxicology e.V.) as “recommended for healthy housing”, this high-quality coating noticeably improves indoor climate and is particularly allergy-friendly.  

• Regulating heating and cooling (infrared reflection) 
• Better feel-good climate due to lower heating demands
• Reduces the development of condensation water  
• Stable and comfortable room climate
• Awarded the certificate "Medically Recommended for Lodgings" by the Society for Medically Sound Lodgings, Building Hygiene and Indoor Toxicology.  
•  For ecological, energy-oriented renovation
• Prevents mold and fungi in a natural way
• CO² emission reduction

•  MIG-ESP® Interior can be applied with a paint roller, brush or airless spraying equipment.
• MIG-ESP® Interior can be used with the appropriate primer on a variety of substrates in the entire indoor area.  
• The MIG color chart gives you a wide range of colors to choose from.

• Depending on the type and absorbency of the substrate, approx. 0.4 liter/M2 with two coats on smooth surfaces. 
• Note:  Rough, structured or highly absorbent surfaces can significantly increase consumption.  Exact consumption quantities are to be determined by creating test areas.

Packaging: 5/15 Liter Plastic Bucket

MIG DHMb® Lining System for Exterior Application

Place of Origin: Germany

MIG-ESP® Exterior is a highly breathable and heat-reflecting coating.  It works water-repellent and prevents the formation of mold and algae by regulating heat and moisture.  The high-quality coating offers an increase in value for every building due to its optical brilliance as well as its longevity.

• Heating and cooling regulation (infrared reflection)
• Non-flammable – A2 fire protection class
• Brilliant facades through the reflection of light
• Improves the durability of facades   
• Prevents algae and fungi in a natural way
• Recommended for ecologically energetic renovation
• CO² savings

•  MIG-ESP® Exterior can be applied with a paint roller, brush or airless spraying equipment.
• MIG-ESP® Exterior can be used with the appropriate Primer on a variety of substrates in the entire outdoor area.  
• MIG-ESP® Exterior is the finishing coating for MIG-ESP® M65 and MIG 262.  Further areas of application are renovation coatings on all paint-bearing substrates and on old and new insulation facades.
• The MIG color chart gives you a wide range of colors to choose from.

•  Depending on the type and absorbency of the substrate, approx.0.2 – 0.3 litre per square meter with a single coat of paint. 
• Note: Rough or highly absorbent surfaces can increase consumption.  Exact consumption quantities are to be determined by creating test areas.  

Packaging: 5/15 Liter Plastic Bucket

MIG ESP® Sealing Primer – Absorbing Surfaces  Between Plaster and Coating 

The right primer for every purpose

Place of Origin: Germany

The MIG-ESP® Sealing Primer is suitable for absorbent surfaces such as plaster, fillers or thermo plaster.  It ensures that the surface becomes every absorbing, so the subsequently applied coating can achieve an optimal result.

MIG-ESP® Sealing Primer is a ready-to-use, colourless primer for hydrophobicizing absorbent mineral substrates, especially for the DHMb® Lining System (DHMb® = Double Hybrid Membrane).  It is suitable for interior and exterior use as well as for the subsequent application of MIG-ESP® Interior or Exterior.   

Substrates such as mineral-based plasters as well as gypsum plasterboard are rendered hydrophobic reliably while their water vapor permeability is fully preserved.  Before the Subsequent application of MIG-ESP® Interior or Exterior, allow MIG-ESP® Sealing Primer to dry thoroughly to achieve an excellent bond between the substrate and MIG-ESP® Interior or Exterior, MIG-ESP® Sealing Primer does not prevent the discoloration or penetration of foreign substances for subsequently applied coatings.

MIG-ESP® Sealing Primer is applied undiluted, approx. 0.15 - 0.25 liter/M2 depending on the absorption behavior of the substrate and the chosen application method.  Exact consumption quantities are to be determined by creating test areas.

Packaging: 5/10/20 Liter Plastic Bucket

MIG ESP® Special Primer – Non-absorbent Surfaces  Coating Smooth Surfaces 

Bonding bridge for surfaces that are difficult to coat

Place of origin: Germany

The MIG-ESP® Special Primer is suitable for extremely smooth and non-absorbent structures.  Furthermore, it is an ideal convenient for non-structured surfaces, that are difficult to coat.  The primer forms the bonding layer for the application of mineral and pasty products.  The smooth surface will be retained.  It is ready for use and easy to process.   

MIG-ESP® Special Primer is a ready-to-use, solvent-free and alkali-resistant primer, especially for the DHMb® Lining System (DHMb® = Double Hybrid Membrane).  It is suitable for use in indoor and outdoor areas as well as for the subsequent application of MIG-ESP® - Interior or Exterior.

Suitable as a bonding agent for smooth, non-absorbent substrates.  Before the subsequent application of MIG plaster as well as before the use of mineral and pasty products whose lack of pretreatment can lead to deflagration of the finish plaster.  MIG-ESP® Special Primer prevents the discoloration or penetration of foreign substances for subsequently applied coatings.

MIG-ESP® Special Primer is applied undiluted.  The coverage rate is approx. 0.20 - 0.30 liter/M2 depending on the porosity of the substrate and the chosen application method.  Exact quantities can be determined by creating test areas.

Packaging: 5/15 Liter Plastic Bucket

MIG ESP® Primer Quartz Filled – Hard to Coat Surfaces  Bonding Bridge For QuartZ-Sand-Optics – Maximum grip for long-lasting plaster

Place of origin: Germany

MIG-ESP® Primer quartz-filled is especially suitable as a substrate for long-lasting plasters due to its high adhesive function. It can also be used on surfaces that are difficult to coat, such as metal, plastics or smooth wood. A rough structure is created on the surface to be coated so that the coating can adhere to it.

MIG-ESP® Quartz filled Primer is a ready-to-use, solvent-free, quartz-filled and alkali-resistant Primer, especially for the DHMb® Lining System (DHMb® = Double Hybrid Membrane).  It is particularly suitable for indoor and outdoor use as well as for the subsequent application of MIG-ESP® - Interior or Exterior.   

Suitable as a bonding agent for smooth, non-absorbent substrates.  Before the subsequent application of MIG plasters as well as before the use of mineral and pasty products whose lack of pretreatment can lead to deflagration of the finish plasters.  MIG-ESP® Primer Quartz filled prevents the discoloration or penetration of foreign substances for subsequently applied coatings.

MIG-ESP® Primer Quartz filled is applied undiluted.  The coverage rate is approx. 0.20 - 0.30 liter/M2 depending on the porosity of the substrate and the chosen application method.  Exact quantities can be determined by creating test areas.

Packaging: 5/15 Liter Plastic Bucket

MIG 262 Plaster - Highly Durable Plaster  Easy Plastering - A Great Effect 

Visually and Energetically

Place of origin: Germany

This bright and breathable plaster is suitable for indoor and outdoor use.  Thanks to its easy processability it can also be used as a decorative plaster.  It prevents the entry of moisture into the walls and works supportive in the process of drying out the walls.  The high durability of this plaster protects buildings from weather damage which ensures high longevity.

• Water-repellent 
• Breathable
• Highly tempered
• Easy to process
• Fire protection class A1
• For interior and exterior use
• Excellent adhesion

This light and breathable plaster is suitable for indoor and outdoor use.  Due to its easy processability, it can also be used as a decorative plaster.  It prevents moisture from entering the walls and helps to dry them out.  Due to the high strength of this plaster, the walls are optimally protected against weather influences, thus increasing the longevity of the building.

Packaging: 30Kg (per paper bag) 

MIG M 65 Plaster – Mineral Lightweight Plaster  

Only Dry Walls Are Warm Walls – Let Your Building Breathe

Place of origin: Germany

This thermally insulating and breathable lightweight plaster is highly productive, purely mineral and easy to process.  It is suitable for indoor and outdoor use, where it constantly dehumidifies the walls Ideal for highly insulated buildings as well as for the energetical renovation of concrete and brick walls.

• Highly efficient
• Purely mineral-based
• Extremely water vapor permeable, moisture regulating
• Especially for highly heat-insulating masonries
• Not flammable – fire protection class A 1
• Heat reflecting surface
• Chromate-reducted according to EU Directive 76/769/EECHigh-yielding

MIG Therm M 65 is heat-insulating fire protection and system lightweight plaster based on lime, cement, fractionated sands, mineral lightweight aggregates and special additive for improving processability MIG Therm M 65 is plaster of mortar group P II according to DIN 18550 and strength class CS-II DIN EN 998-1.

Packaging: 15kg (per paper bag)